Wetsuit Dressing Gel
RM39.00
Wetsuit Dressing Gel
5-Port Upgrade Kit (XTX200 & XTX100)
RM239.00
5-Port Upgrade Kit (XTX200 & XTX100)
RM13,909.00 RM9,099.00

Description

Features:

First stages

  • Over balanced for superior performance.
  • Compact environmentally sealed diaphragm system completely eliminating the maintenance issues associated with silicone, oil or grease filling.
  • Recommended for frequent use in cold or contaminated water.
  • Environmental over-moulded endcap & diaphragm that helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage.
  • Double swivel hose for greater freedom of movement and comfort.
  • 5 x 3/8″ UNF medium pressure ports & 2 x 7/16″ UNF high pressure ports.
  • The 5th 3/8″ UNF medium pressure port includes a protective bumper when not in use.
  • Forged first stage body with heat exchanging ribs for maximum thermal performance.
  • Angled HP ports for optimal hose routing and fitting transmitters.
  • Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation.
  • Tested for Octopus use – EN250A to 60 meters cold water.
  • Nitrox/Oxygen compatible

Second stages

  • Simple to use with no dive controls, pre-settable cracking effort or venturi control by an Apeks approved qualified technician.
  • High performance pneumatically balanced lever operated poppet valve.
  • Large diver friendly self-flushing controllable purge button.
  • Front cover with over-moulded elastomer bumpers incorporates a formed chrome plated brass plate improving durability of the demand valve.
  • Large protective elastomer bumpers on the side and on the top to protect the demand valve from impacts and scratches in the most vulnerable places.
  • Reversible second stage for either a left or right-hand gas supply.
  • Hard wearing, satin chrome.
  • All gas contact moulded parts are produced using an active protection additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae.
  • Large heat exchanger fitted to help reduce second stage freezing.
  • Nitrox/Oxygen compatible

Kit Contents

  • 2 ea. DBT (Dry Sealed Bumper Turrret) DIN 1st stages with 5 port swivel turrets.
  • 2 ea. MTX-R second stages.
  • 210cm double swivel hose.
  • 61cm double swivel hose
  • 2 ea. 25cm length MP inflation hoses (one for buoyancy system, one for drysuit)
  • 2 ea. TEK pressure gauges with 18cm hoses
  • 1 ea. 90° elbow fitting
  • 1 ea. bungee necklace
  • 1 ea. bungee clip
  • 1 ea. stainless steel bolt snap
  • 2 sets of short exhaust ports
  • Regulator bag
  • Setup illustration, CD manual and quick start guide
  • New Bungee Connector System

TO MAINTAIN YOUR AQUALUNG & APEKS INTERNATIONAL WARRANTY PLEASE PURCHASE FROM OUR AUTHORIZED DEALERS ONLY. PLEASE SEE APEKS UNAUTHORIZED DEALER WARNING


Specs:

Connections DIN only
Type of first stage Over-balanced diaphragm design, environmentally sealed
Body Type Forged first stage body with heat exchanging ribs for maximum thermal performance.
Number of HP ports 2 (7/16″ UNF) per first stage
Number of MP ports 5 (3/8″ UNF) per first stage
Environmental Dry Kit Standard
First stage exterior Satin chrome
Orientation Convertible LH or RH
Coldwater Use Yes
Type of second stage Pneumatically balanced
Opening Effort Control Knob No
Integrated Venturi Lever No
Mouthpiece Comfo-bite™
Exhaust tee Diver Changeable – comes with 2 sets
Heat Exchanger for freezing resistance Yes
Hose type Rubber breathing hoses and braided flexi inflator hoses
Nitrox compatible Yes to 40% O2 when new, out of the box / Can be O2 cleaned to 100%.
Gauge face Tempered glass
Over-pressure relief on gauge back Yes