MTX-RC DIN Regulator Set
RM8,498.00 RM4,388.00
MTX-RC DIN Regulator Set
XTX Tungsten Swivel 5th Port INT Set
RM8,197.00 RM3,588.00
XTX Tungsten Swivel 5th Port INT Set

MTX-R INT Regulator Set

RM7,498.00 RM4,088.00

The MTX-R is based on the MTX, a regulator that was developed in accordance with the United States Navy Experimental Dive Unit extreme cold water test. Innovations in design mean that the MTX-R regulator performs in almost freezing water at a depth of over 60 meters, something that very few other regulators on the consumer market can boast. With an innovative first stage design that helps to prevent ice build up around the diaphragm, the MTX-R is reliable, rugged and expedition ready.

Packaged with Apeks MTX-R Octopus, PS7 Tek SPG and Apeks MTX-RC Regulator Bag.

Qty
RM7,498.00 RM4,088.00

Description

 


Buy from an Authorized Dealer to ensure your Aqualung & Apeks products are covered by Warranty. Click to read more.

Apeks MTX-R Regulator:

MTX-R First Stage

  • Available in Yoke / INT configuration.
  • Suitable for cold water use (below 10°C / 50°F)
  • Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in thehose to increase at a faster rate than ambient. This results in superior performance at depth.
  • Over-molded innovative endcap and environmental diaphragm, a forged1st stage body offering maximum thermal performance.
  • The 5th 3/8″ UNF medium pressure port includes a protective bumper when not in use.
  • Forged first stage body with heat exchanging ribs for maximum thermal performance.
  • Angled HP ports for optimal hose routing and fitting of transmitters.
  • Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation.
  • Ribbed diaphragm clamp for improved heat exchange in cold water conditions.
  • Double swivel hose for greater freedom of movement and comfort.
  • Tested for Octopus use – EN250A cold water.
  • Nitrox/Oxygen compatible – Up to 40% O² outside the EU (European Union), within the EU anything above 21% O² must use an M26 Connection.

MTX-R Second Stage 

  • High performance, pneumatically balanced, lever operated poppet valve.
  • Large, diver friendly self-flushing controllable purge button.
  • Front cover with over-molded elastomer incorporates a formed chrome plated brass plate improving durability of the second stage.
  • Large protective elastomer bumpers on the side and on the top to protect the second stage from impacts and scratches in the most vulnerable places.
  • Reversible second stage for either a left or right hand gas supply configuration.
  • A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
  • Comfo-bite mouthpiece
  • Double swivel hose
  • Flexible nylon braided hose has better cold water performance than traditional rubber hose.

MTX-R Octopus

  • Patented Comfobite mouthpiece reduces jaw fatigue. Secures the 2nd stage more comfortably.
  • Metallic insert in the 2nd stage increases overall durability of the product.
  • Diver Changeable Exhaust– Easy to change exhaust system to offer a choice between compact size or optimum bubble diversion.
  • No breathing adjustment or venturi to allow you to focus on the dive
  • Designed and manufactured in the UK.
  • Trivalent chrome uses less energy than traditional chrome and is kinder to the environment.

PS7 TEK Gauge

  • CE 52mm, Tempered Glass Metal Pressure Gauge
  • Nickel plated brass housing
  • Copper beryllium bourdon tube mechanism and silver welding
  • Luminescent and easy-to-read dial
  • Built-in over-pressure relief for safety
  • Cover with loop for fixing
  • Thermoplastic 36″ HP Hose
  • 0-360 bar with 10 bar pressure increments
  • Reserve Zone with red mark 0-50 bar
  • Manufactured in Italy
  • Certified according to EN250:2014 & European Regulation 2016/425

Includes Apeks MT-R Regulator Bag

Excludes BCD Low Pressure Inflator Hose