WTX-D30 PSD System Package
RM4,914.00 RM2,688.00
WTX-D30 PSD System Package
Air Source
RM1,499.00 RM999.00
Air Source
RM4,514.00 RM2,388.00


WTX-D18 System Package includes:

  1. Apeks WTX-D 18 Wing
  2. Apeks Deluxe Web Harness
  3. Apeks WTX Aluminum Backplate
  4. 2 x Apeks Book Screws
  5. 2 x Apeks GripLock Tank Bands

Features for each:

1. WTX-D 18 Wing

  • Lift Capacity (lbs/N) – 18 lbs
  • Inflator:
    • K style with brass buttons
    • Low profile 16″ oval-shaped hose
    • Safety cable to prevent hyper-extension
    • Positioned off-center so as not to interfere with regulator 1st stage
  • Dump Valve
    • Low profile flat valve
    • Positioned in front, lower-left side
  • Tank Stabilizer Bars
  • Drains
    • 2 large drain grommets
    • Center mesh drain panel
  • Materials
    • Exterior: 1000D Armorshield Cordura
    • Inner air cell: 22mil (.022) thick black urethane
    • Zipper: heavy duty YKK #10 plastic zip and slide

2. Deluxe 1 piece Webbed Harness?

  • 12ft. of solid 2″ (5cm) webbing with center grommet
  • 2″ (5cm) wide crotch strap
  • 6 stainless 2″ (5cm) D-rings
  • Includes neoprene shoulder protectors
  • 2 elastic retaining loops on shoulders and one on crotch strap
  • Heavy duty stainless waist buckle
  • 6 stainless serrated retainers

3. WTX Aluminum Back Plate

  • 6061 anodized aluminum alloy
  • The aluminum weighs approx 1 lb 11oz (753g)
  • 4 each upper and lower slots accommodate nylon cylinder bands so a single cylinder can be strapped directly to the plate. Having a series of 4 slots provides lateral stability of the cylinder that traditional 2 slot plates cannot
  • 3 holes at the top of the plate offer a range of height adjustments for the buoyancy cells and the cylinders. In addition, a corresponding lower center slot allows for lower band bolts that are misaligned
  • 2″ wide crotch strap slot
  • Upper and lower perimeter holes along either side and holes along the bottom allow for the mounting of accessories
  • Electro-plate finish and a laser-etched
  • Apeks logo to enhance the look of the plate

4. Stainless Steel Book Screws

  • Used to attach a wing to a back plate
  • 3/4″ length.
  • These versatile screws are also smart to carry in your save-a-dive kit

5. GripLock™ Tank Bands (x 2)

The GripLock tank band assembly is the easy and safe solution for securing a cylinder to a BC. With its pat pend Finger-Saver feature and macro presets, it solves many of the common problems associated with metal cam buckles.

  • Innovative Finger-Saver feature (pat. pend.) makes the GripLock™ safe by eliminating painful, pinched fingers.
  • The macro-adjustment is set just once until you change to a cylinder with a different diameter. Three presets cover the various diameter cylinders in the field today.
  • The micro-adjustment can be used for fine-tuning the fit after the band is on the cylinder. Hint: If you line up the inside edges of the hook n loop on the micro adjustment side of the tank band, it will be perfectly set for an Al80 cylinder.
  • Rubber traction pad on the backside of the GripLock™ provides added security

Optional SureLock II Weight System

Warranty: Limited Lifetime